사건 세부 사항
집 / 사건 /

회사 사건 NYRD3000 3D Radar Level Scanner for Cement Silo Volume and Bulk Material Inventory Measurement

NYRD3000 3D Radar Level Scanner for Cement Silo Volume and Bulk Material Inventory Measurement

2026-11-18

NYRD3000 Series Industrial 3D Radar Level Scanner

The NYRD3000 Series 3D Radar Level Scanner is independently developed by NUOYING for intelligent measurement of bulk solid materials in industrial storage silos, warehouses and process vessels. It integrates millimeter-wave radar technology, multi-point scanning and three-dimensional imaging algorithms to provide comprehensive information about material distribution and storage conditions.

In traditional silo measurement applications, conventional radar level transmitters generally measure the distance to a material surface at a single measurement point. However, bulk solid materials often form irregular surfaces due to uneven feeding, discharging, bridging and material accumulation. A single-point measurement may not fully represent the actual material distribution inside a silo.

The NYRD3000 addresses this challenge through multi-point radar scanning. By collecting measurement data from different positions on the material surface, the system reconstructs a three-dimensional material pile model and calculates the overall material level, storage volume and estimated inventory weight.

Designed for demanding industrial environments, the scanner is particularly suitable for high-dust applications involving cement powder, fly ash, raw coal, mineral powder, sand and other bulk materials.

Its non-contact measurement principle reduces direct contact with abrasive or dusty materials, while its system integration capabilities allow measurement data to be transmitted to industrial control systems and cloud-based inventory management platforms.

The NYRD3000 provides a practical solution for industrial enterprises seeking to improve silo inventory visibility, optimize material storage management and support intelligent production operations.

최신 회사 사례 NYRD3000 3D Radar Level Scanner for Cement Silo Volume and Bulk Material Inventory Measurement  0

Working Principle

The NYRD3000 Series uses millimeter-wave radar technology to perform multi-point scanning of the material surface.

  1. Radar Signal Transmission: The radar scanner transmits millimeter-wave signals toward the stored bulk material.

  2. Multi-Point Data Acquisition: Reflected signals are collected from multiple positions across the material surface.

  3. 3D Surface Reconstruction: The measurement system processes the collected data to reconstruct a three-dimensional material surface model.

  4. Volume Calculation: Based on the three-dimensional model and predefined silo geometry, the system calculates the stored material volume.

  5. Inventory Estimation: Material inventory weight can be estimated using the configured bulk density of the stored material.

  6. Data Transmission: Measurement results can be connected to PLC, DCS, industrial computers and cloud-based monitoring systems, depending on the selected configuration.

This approach provides more comprehensive information about irregular material surfaces than conventional single-point level measurement.

최신 회사 사례 NYRD3000 3D Radar Level Scanner for Cement Silo Volume and Bulk Material Inventory Measurement  1

Typical Measurement Outputs

  • Three-dimensional material surface visualization

  • Multi-point material level information

  • Average material level

  • Maximum and minimum material level

  • Material storage volume

  • Estimated inventory weight

  • Silo inventory status and trend monitoring

Key Features and Advantages

Key Features of NYRD3000 3D Radar Level Scanner

1. Advanced 3D Radar Scanning Technology

Adopts millimeter-wave multi-point scanning technology to capture material surface information from multiple measurement positions and reconstruct a three-dimensional material pile model.

2. Designed for High-Dust Environments

Optimized for dusty bulk solid storage applications, including cement silos, fly ash silos, coal bunkers and mineral powder storage tanks.

3. Comprehensive Silo Inventory Measurement

Provides material level, volume and estimated inventory weight information to support more comprehensive silo inventory management.

4. Accurate Measurement of Irregular Material Surfaces

Multi-point scanning helps identify uneven material distribution, inclined surfaces and irregular material piles that may not be represented by a single-point measurement.

5. Non-Contact Measurement

Measures material surfaces without direct contact with the stored material, reducing mechanical wear and minimizing maintenance associated with contacting measurement components.

6. Optional Explosion-Proof Configuration

Explosion-proof options can be selected according to the applicable hazardous area classification and project requirements.

7. Industrial Automation Integration

Supports connection with host computers and industrial control systems, facilitating data exchange with PLC, DCS and other compatible platforms according to the selected communication configuration.

8. Cloud-Based Inventory Management

Measurement data can be integrated with cloud platforms for remote silo monitoring, inventory visualization and centralized material management.

9. Independent Product Development and OEM/ODM Support

Developed by NUOYING with support for application-specific configuration, engineering consultation and OEM/ODM cooperation.

최신 회사 사례 NYRD3000 3D Radar Level Scanner for Cement Silo Volume and Bulk Material Inventory Measurement  2